APC AP7820 Metered 12A/208V 10A/230V 8-Outlet 1U Rack Power Distribution Unit. Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local and remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provides power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access and configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruXure Manager, InfraStruXure Central, Capacity Manager and Change Manager.

This is a new unit. It includes: Rackmount Brackets, USB Cable, Network Cable, Power Cord, Screws, CD and Manual.

Features:

• Power distribution strip ( rack-mountable )
• AC 208-230V
• Ethernet
• 8 output connector(s)
• 1U

Specifications:

Brand: APC
Model: AP7820
Nominal Output Voltage 208V , 230V
Overload Protection No
Maximum Total Current Draw 10
Output Connections (8) IEC 320 C13 (Battery Backup)
Different voltages and corresponding amperages 10A @ 230V, 12A @ 208VA
Nominal Input Voltage 200V , 208V , 230V
Input frequency 50/60 Hz
Input Connections IEC­320 C14
Cord Length 6.5ft ( 1.98meters )
Load Capacity 2300VA
Maximum Input Current 15A
Regulatory Derated Input Current 10A
Maximum Height 1.74inches ( 44mm , 4.4cm )
Maximum Width 17.47inches ( 444mm , 44.4cm )
Maximum Depth 4.03inches ( 102mm , 10.2cm )
Rack Height 1U
Color Black
Includes:
Rackmount Brackets
USB Cable
Network Cable
Power cord
Screws
CD
Manual

This is a new unit. It includes: Rackmount Brackets, USB Cable, Network Cable, Power cord, Screws, CD and Manual.