Cisco 7600 Series SPA Interface Processor-400 Module Card 7600-SIP-400 V07. The Cisco 7600-SIP-400 module allows for the full advantage of the increased scalability, performance, and rich features offered by Cisco. The Cisco 7600 SIP-400 helps enable high-performance, intelligent wide- and metropolitan-area network (WAN/MAN) services. Enterprises and service providers can take full advantage of the increased scalability, performance, and rich features offered by the Cisco 7600 SIP-400, along with the many options for WAN aggregation and connectivity offered in the SPA/SIP portfolio. The Cisco 7600 SIP-400 accepts up to four Cisco SPAs, including GE, OC-48 ATM, OC-12 ATM, OC-3 ATM, OC-12 Packet over SONET/SDH (POS), and OC3 POS, for MAN & WAN connectivity.
Model Number: CISCO 7600
Part Number: 7600-SIP-400 V07
Compatible Numbers: 68-1920-21
Also Included:
1 x SPA-5X1GE-V2
Features and Benefits:
The unique value provided by the Cisco 7600 Series is the convergence supported from the physical layer to a highly scalable application layer. The Cisco 7600 Series can scale from 10 Megabit Ethernet to 10 Gigabit Ethernet in the LAN, and DS-0 to OC-48/STM-16 in the WAN. Differentiated Services (DiffServ) and IP Precedence priority packet marking, along with QoS classification, policing, queuing, intelligent packet discard, and security access control on every port, help ensure that the platform can meet the demands of any network environment. The rich QoS features of the Cisco 7600 Series include the capability to guarantee bandwidth to business critical applications; limit bandwidth to noncritical applications; drop selective, low-priority packets to avoid congestion; and mark packets to control QoS for any type of traffic flow.
A major benefit of LAN, WAN, and MAN consolidation on the Cisco 7600 Series is the reduction in the number of platforms to deploy and manage in any given network. This service convergence not only simplifies network design and configuration, but it also decreases rack space, power requirements, and the training and administrative burden associated with managing many different platforms. Such integration eases the support needs of maintenance staff; spare parts for multiple platforms do not need to be stocked or managed.
Specifications:
| Compatibility | Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems |
| Minimum Software Compatibility | Cisco IOS® Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL and Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB or later releases for RSP720-GE-3CXL and RSP720-GE-3C systems |
| Protocols | TCP
User Datagram Protocol (UDP)
IPv4 Unicast and Multicast
IPv6 Unicast and Multicast
Multiprotocol Label Switching (MPLS)
SAToP and CESoPSN |
| Encapsulation | Frame Relay
Point-to-Point Protocol (PPP)
High-Level Data Link Control (HDLC)
ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR)
ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+
TDM over MPLS, ATM over MPLS, and ATM over GRE
L2TPv3 |
| Cards, Ports, and Slots | Four SPA bays per Cisco 7600 SIP-400 |
| QoS | QoS, ACLs, and Low-Speed Aggregation Features
QoS
Modular QoS CLI (MQC)
Classification based on:
IP Precedence (IPv6 and IPv4)
Diffserv code point (DSCP) (IPv6 and IPv4)
MPLS experimental values (MPLS EXP)
Extended ACL
ATM CLP
Frame Relay DE
Class of Service (CoS)
VLAN
Congestion Avoidance
Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic)
Queuing
Congestion management
Per-virtual circuit queuing
Ingress and egress Low-Latency Queuing (LLQ)
Egress Class-Based Weighted Fair Queuing (CBWFQ)
Traffic Classification, Shaping, and Bandwidth Policing
Marking
Policing
Distributed traffic shaping (DTS)
Hierarchical service policies
Security
Standard and extended ACLs
Layer 2 and Layer 3 VPNs
Ethernet over MPLS (EoMPLS)
ATM over MPLS (ATM over MPLS)
ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode
Frame Relay over MPLS (FRoMPLS)
Layer 3 MPLS/VPN over GRE
ATM over GRE, Ethernet over GRE
TDM over MPLS
High availability
IPv4 Nonstop Forwarding (NSF)
IPv4 Stateful Switchover (SSO)
Automatic Protection Switching (APS) with ATM, POS SPAs
OIR for both SIP and SPA
Multilink support
Frame Relay Multilink^1 (1) Added in >15.2(04)S |
| Memory | 1 GB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) per Cisco 7600 SIP-400 |
| Environmental conditions | Operating temperature: 32 to 104°F (0 to 40°C)
Storage temperature: -40 to 167°F (-40 to 75°C)
Relative humidity: 10 to 90 percent, noncondensing
Operating altitude: -60 to 2000m |
| MIBs | Cisco Entity MIB (CISCO-ENTITY-MIB)
Cisco Entity Asset MIB
Cisco Entity Field-Replaceable Unit (FRU) Control MIB
Cisco Entity Alarm MIB
Interface IF MIB (RFC 2233)
Frame Relay MIB (RFC 1315)
Cisco Frame Relay MIB
ATM MIB (RFC 1695)
Definitions of Managed Objects for Bridges (RFC 1493)
Evolution of Interfaces Group of MIB-II (RFC 1573)
SNMP MIB II (RFC 1213)
Remote Monitoring (RMON) MIB (RFC 1757)
Switch Monitoring (SMON) MIB |
| Physical specifications | Occupies one slot in a Cisco 7600 Series router
Supports up to 12 Cisco 7600 SIP-400s in a 13-slot chassis
Requires Supervisor Engine 720-3B or 720-3BXL
Dimensions (H x W x D): 1.75 x 15.375 x 16 in.
Weight: 16 lbs not including the packaging |
| Power | 185W power consumption per Cisco 7600 SIP-400
265W maximum power consumption with 4 SPAs |
