68#3581-10564A | Copper Mountain 2400 Mtu Concentrator

Genuine Original Copper Mountain 2400 High Speed Internet Access Multi Tenant MTU Concentrator 60MUSA-34865-DE-N 68#3581-10564A. Copper Mountain’s OnPrem 2400 multi-tenant unit (MTU) Concentrator enables carriers and other service providers to profitably offer high-speed Internet access to building tenants. By using Digital Subscriber Line (DSL) technology to leverage existing in-building copper telephone wires, providers need not rewire a building to offer broadband services. This cost-effective and scalable product delivers high-speed data and Internet access to a wide range of building tenants—including businesses, executive office suites, hotels, and residential complexes—increasing property value and tenant retention.

Part Number: 68#3581-10564A
Compatible Part Numbers: 60MUSA-34865-DE-N

Features:

Low entry cost. Offering 8, 16, or 24 ports of Symmetric DSL (SDSL) technology, the OnPrem 2400 delivers up to 2.3 Mbps connectivity that scales easily as subscribers increase. With a low entry investment and per-connection cost, providers can profitably deliver high-bandwidth services to tenants located in any building.
Ease-of-use. Designed from the ground up for smaller buildings, this compact unit has a broad range of Internet Protocol (IP) software and hardware features that make it easy to install and manage. Web- and Simple Network Management Protocol (SNMP)-based centralized management increases provisioning speed, reduces set-up time, and decreases overhead. Tiers of service. Service providers can deliver differentiated services by offering a range of connectivity speeds at different prices. Flexible bandwidth management enables oversubscription, allocating wide area network (WAN) bandwidth proportionally during heavy use.
Optimized MTU solution. Part of Copper Mountain’s comprehensive family of solutions for multi-tenant buildings, the OnPrem 2400 is optimized for small- and medium-sized MTU office buildings, multi-dwelling unit (MDU) residential complexes, and multi-hotel unit (MHU) hotel and motel facilities.

Specifications:

Interfaces	WAN interfaces - Dual-port or quad-port T1/E1 interface with embedded channel service unit /data service unit (CSU/DSU) - T1 supports B8ZS and AMI encoding with ESF framing - E1 supports AMI and HDB3 encoding and E1-MF/E1-CRCMF framing - T1/E1 point-to-point circuit services with PPP (RFC 1661) - Multi-Link Point-to-Point Protocol (MLPPP) with T1/E1 (RFC 1990) - Supports higher speed trunks by combining links via inverse multiplexing - Supports fractional T1 and E1 trunks - 10/100 RJ-45 Ethernet port can be used as a trunk interface User Port Interfaces - 2.3 Mbps SDSL via RJ-21X 24-pair connector for full-duplex links over existing phone wiring - 8-, 16-, and 24-port configurations supported, field-upgradable to 24 ports - 10/100 RJ-45 Ethernet port can serve as a user port or management interface
Distance and Performance	CPE can be 4,000 feet or more from concentrator (24 AWG) Connectivity speeds range from 64 kbps to 2.3 Mbps per subscriber
IP Addressing and Services	IPv4 packet forwarding Network Address Translation - Public address pass-through - One-to-one NAT for servers - NAT with port address translation - Multiple subnet support, allowing IP addresses to be assigned to the 2400 one subnet at a time
DHCP Servers	Supports one virtual DHCP server per subscriber port, providing each port with an independently-configurable DHCP server to manage IP addresses dynamically RFC 2131
OSPF Routing Protocol	Simplifies configuration by automatically distributing IP addresses assigned by administrator Provides high reliability WAN connectivity by automatically switching traffic from a failed WAN link to the next best operational link
Bandwidth Management	Independent configuration of each port controls subscriber bandwidth; variable speeds available from 64 kbps to line speed (2.3 Mbps) Concentrator manages subscriber flows for highest balanced throughput with per-port queuing and traffic shaping
Network Management	Browser-based access for easy configuration and management Management via any standard Web browser communicating with management Web server in the concentrator Management integrated into CopperView™ Access Management System Easy-to-learn and use; includes point-and-click set-up for system and subscriber profiles Two levels of administrator privilege: “root” (concentrator admin) and “user” (subscriber update) SNMP V1/V2c compatibility for network monitoring tools integration Temperature, power supply, and fan sensors detect and alarm during abnormal conditions
Software Upgrades	Stored in internal Flash memory; field upgradable by in-band download Both concentrator and CPE are remotely upgradable
Concentrator Power Options	100 to 240 VAC, 50 to 60 cycles, 100 watts