Dell Optiplex GX260 Motherboard with AGP Slot. This replacement board will allow Dell customers with Optiplex GX260 boards to upgrade to a board with an AGP slot enabling them to install AGP video cards.
Dell Compatible Part#'s: 4T274 , 04T274 , 0T606 , 00T606 , 5T766 , 05T766 , 2X378 , 02X378 , 3X290 , 03X290 , 62YVH , 2R433 , 02R433 , 0T606 , 3U330
| Form Factor | microATX - 32.3 x 9.5 x 35.6 cm (12.7 x 3.8 x 14.0 inches)
With stand - 33.8 x 18.0 x 35.6 cm (13.3 x 7.1 x 14.0 inches) |
| Processor | - Support for an Intel® Pentium® 4 processor in a mPGA478 socket with a 400/533 MHz system bus
- Support for an Intel® Celeron® processor in a mPGA478 socket with a 400 MHz system bus
- 128K Cache or 512K Cache Processors Only
|
| Memory | - Two 184-pin DDR DIMM sockets
- Support for single-sided or double-sided DIMMs (DDR 400/333/266)
- Support for up to 1 GB system memory
- Supports 128MB, 256MB, and 512MB Non-ECC DDR Memory
|
| Chipset | Intel® 845G Chipset |
| Audio | ADI 1981A Audio controller - Line In, Line Out, and Microphone |
| Video | Integrated AGP Graphics Video VGA Connector plus AGP 4x/2x AGP Slot |
| Peripheral Interfaces | - Four back-panel 2.0 USB ports and two front-panel also compatible with USB 1.1
- One serial port
- One parallel port
- One 4x AGP Slot
- One 10/100 Ethernet network port
- Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
- One Floppy diskette drive interface
- PS/2 keyboard and PS2 mouse ports
|
| Expansion Capabilities | - Two PCI Slots
- One 2X or 4X AGP Slot
|