Dell Online Rackmount UPS 6000va 208V 4200W 4U Battery Backup Uninterruptible Power Supply J730N 0J730N CN-0J730N. The Dell Rackmount UPS uninterruptible power system (UPS) protects your sensitive electronic equipment from basic power problems such as power failures, power sags, power surges, brownouts, and line noise.
Dell Part Number: J730N 0J730N CN-0J730N
Benefits:
- Online UPS design with pure sine wave output. The UPS filters and regulates incoming AC power and provides consistent power to your equipment without draining the battery.
- True online double-conversion technology with high power density, utility frequency independence, and generator compatibility.
- Selectable High Efficiency mode of operation.
- 4U size that fits any standard 48 cm (19”) rack.
- Start‐on‐battery capability for powering up the UPS even if utility power is not available.
- Extended runtime with an optional External Battery Module (EBM).
- Emergency shutdown control through the Remote Emergency Power-off (REPO) ports.
- Two standard communication ports (USB and DB-9 serial port).
- Optional Dell Network Management Card with enhanced communication capabilities for increased power protection and control.
- Advanced power management with the Dell UPS Management Software for graceful shutdowns and power monitoring.
- Sequential shutdown and load management through separate receptacle groups called load segments.
- Firmware that is easily upgradable without a service call.
- Backed by worldwide agency approvals.
Specifications:
- Nominal Voltage: 200–220V
- Voltage Range (Engineering Specifications): 155–255V auto-sensing
- Nominal Frequency: 50/60 Hz auto-sensing, ±3 Hz
- Efficiency (Normal mode): >95%
- Noise Filtering: Full-time EMI/RFI filtering
- Connections: 4200W: Hardwired
- Power Levels (rated at nominal inputs): 4200W
- Voltage Waveform: Sine wave
- Output Receptacles: 4200W (2) L6-20R - 20A, (1) L6-30R - 30A, (4) IEC 320-C19 - 20A
Battery
- Configuration: 4200W (16) 12V, 7.2 Ah internal batteries; (16) 12V, 7.2 Ah EBM
- Battery Type: CSB GP1272 7.2 Ah or YUASA NP7-12 7Ah
- Voltage: 4200W 192 Vdc internal, 192 Vdc/30A EBM
- Fuses: 30A fuse
- Type: Sealed, maintenance-free, valve-regulated, lead-acid
- Charging: Approximately 4 hours to 90% usable capacity at nominal line and no supplementary power supply load
- Monitoring: Advanced monitoring for earlier failure detection and warning
- Battery Runtimes: 5 minutes at full load/16 minutes at half load
