Dell Networking X1000-Series X1026P 62MWJ 24-Port 1GbE PoE/PoE+ (Up to 369W) 10/100/1000Base-T Ethernet 2-Port 1GbE SFP Fiber USB 2.0 High Speed Managed 1RU Half Width Network Switch. Easily manage your office network with the Dell Networking X1026P 1GbE switch that offers enterprise-class features and intuitive, GUI-based management.
Dell Model Number: X1026P
Dell Part Number: 62MWJ 062MWJ CN-062MWJ
Please Note: Unit comes with power cord only, no cables or accessories included!
Specifications:
Power over Ethernet Ports: 24 PoE/PoE+, up to 369W total
Switch Fabric Capacity: Up to 52Gbps
Forwarding Rate: 38.7Mpps
MAC Addresses: 16K
Packet Buffer Memory: 1Mb
VLAN: Supports up to 4096 port-based VLANs, honors all 4096 VLAN tags
Priority Queues per Port: 4
Power Supply: 450W
Power (Max): 452.8W
Power BTU/hr: 1564.3
Fans: 2 (Rear)
Dimensions: 1.62" x 8.23" x 17.72" (4.125cm x 20.9cm x 45cm)
Weight: 8.38lbs (3.8Kg)
Rack Mount: 1RU, Half Width
Port Attributes:
-Power reduction for short cables or inactive connections
-Autonegotiation for speed, duplex mode and flow control
-Supports Virtual Cable Diagnostics by Marvell and fiber transceiver diagnostics to provide advanced troubleshooting capabilities for your cable infrastructure
-Integrated LEDs for improved visual monitoring and analysis
-Auto-MDI/MDIX mode and flow control
Quality of Service:
-Honor 802.1p values and honor IP DSCP values
-Supports strict priority and configurable weighted round robin (WRR) scheduling across queues
Link Aggregation:
-Industry-standard link aggregation adhering to IEEE 802.3ad standards (static and dynamic, LACP)
-Supports 12 link aggregation groups and up to 4 ports per group
Management:
-Local password and restricted IP addresses for secure access to the switch
-Port mirroring provides the capability of mirroring 8 source ports and VLAN mirroring to improve network traffi Internal DHCP Server
-DHCP client support allows for simplified IP address assignment when used with a DHCP server
-Switch software can be easily uploaded to the switch through the web-management interface
-Configurations can be easily uploaded to and from the switch through the intuitive web-management interface
-Port statistics available through industry-standard RMON
-Switch is factory-configured as an unmanaged switch, but can be easily configured as a web-managed switch with the push of a button
-Jumbo frame support for packets up to 9,000 bytes
-Broadcast storm control to help eliminate network traffic storms
-Limited SNMP monitoring and CLI management - See User Guide for details monitoring and troubleshooting
Environmental Operating Conditions:
-100% Lead-free
-Operating temperature: 32° to 113°F (0° to 45°C)
-Storage temperature: -20º C to 70º C (-4º F to 158º F)
-Operating relative humidity: 10% to 90% noncondensing
Standards and Additional Features Supported:
IEEE 802.3ac - VLAN tagging
IEEE 802.3ad - Link aggregation with static LAG support
IEEE 802.1W - Rapid Spanning Tree (1)
IEEE 802.1D - Spanning Tree (1)
IEEE 802.1Q - Port-based VLANs
IEEE 802.1v - Protocol-based VLANs
IEEE 802.1p - Ethernet priority with user provisioning and mapping
IEEE 802.1X - Port authentication
IEEE 802.3x - Flow control
RFC 826 - ARP
RFC 854 - Telnet
RFC 855 - Telnet option
RFC 1155 - SMIv1
RFC 1157 - SNMP
RFC 1213 - MIB II - Updated by RFC’s 2011, 2012 and 2013
RFC 2579 - Textual conventions for SMI v2
RFC 2580 - Conformance statements for SMI v2
RFC 2819 - RMON
RFC 3164 - BSD Syslog Protocol
RFC 3416 - Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) (December 2002)
RFC 768 - UDP
RFC 783 - TFTP
RFC 791 - IP
RFC 792 - ICMP
RFC 793 - TCP
RFC 951 - BOOTP
RFC 1533 - Including 1534, Interoperation between BOOTP and DHCP
DHCP server
RFC 2131 - Dynamic Host Configuration Protocol
RFC 2132 - DHCP options and BOOTP vendor extensions
RFC 950 - Internet Standard Subnetting Procedure
RFC 1123 - Requirements for internet hosts
RFC 1042 - A standards for transmission of IP datagrams over IEEE 802 networks
RFC 1071 - Computing the internet checksum
IGMPv2 snooping
MLD snooping
GARP
GMP snooping
Jumbo frames
IPv6 support
IPv4 and IPv6 Static routing
USB support for update of firmware/configuration
Auto-update of firmware and configuration, from TFTP server/USB
Console port
Authentication via TACACS+ server
Port security
Dynamic ARP Inspection
DHCP Snooping
SHCP Relay
ACL
Voice VLAN
Unidirectional Link Detection (UDLD)
Multiple Spanning Tree (MSTP)
LLDP and LLDP-MED
sFlow V5
Port Profile (built-in scripts)
