ECS RC410-M2 Rev.2.1 Intel Socket LGA775 DDR2 Micro-ATX Desktop Motherboard. ECS RC410-M2 Rev.2.1 Intel LGA775 DDR2-667 SATA Ultra DMA 133 PCI-Express X16, x1 & PCI Slots IEEE 1394a 8-channel audio VIA 6307 Motherboard For Intel Pentium D Dual Core / Pentium 4 & Celeron Processors.
Operating System
Compatibility | º Windows XP & Vista Only! Requires Floppy Drive For XP Installation. |
| CPU | º LGA775 socket for latest Intel Pentium 4 / Celeron processor
º FSB 800/533 MHz
º Support Hyper-Threading Technology
|
| CHIPSET | º ATI RC410 & Uli M1573
º North Bridge: ATI RC410
º South Bridge: Uli M1573
|
| GRAPHICS | º RC410 on-chip (Radeon X300-based 2D/3D graphics)
|
| MEMORY | º Single-channel DDR2 memory architecture
º 2 x 240-pin DDR2 DIMM socket support up to 2 GB
º Support DDR2 667/533/400 DDR2 SDRAM
|
| EXPANSION SLOT | º 1 x PCI Express x16 slot
º 1 x PCI Express x1 slot
º 2 x PCI slots
|
| STORAGE | º Supported by M1573
• 2 x Ultra DMA133/100/66 devices
• 4 x Serial ATA devices
• RAID0, RAID1& RAID 0+1 configuration
|
| IEEE 1394a (optional) | º VIA 6307 support 2 x IEEE1394a ports
|
| AUDIO | º Realtek ALC880 8-channel audio CODEC
|
| LAN | º Marvell 8001 10/100/1000 Mbps Fast Ethernet Controller
|
| REAR PANEL I/O | º 1 x PS/2 keyboard & PS/2 mouse connectors
º 4 x USB ports
º 1 x RJ45 LAN connector
º 1 x VGA port
º 1 x 1394a port (optional)
º 1 x Parallel port (LPT1)
º 1 x Serial port (COM1)
º 1 x Audio port (Line-in,4x Line-out, Mic_in)
|
| INTERNAL I/O CONNECTORS & HEADERS | º 1 x 24-pin ATX Power Supply connector
º 1 x 4-pin ATX 12V connector
º 1 x FDD connector supports one 360K~2.88MB FDD
º 2 x IDE connectors
º 4 x Serial ATA connectors
º 1 x COM2 header (optional)
º 1 x SPDIF out header
º 1 x 1394a header (optional)
º 2 x USB 2.0 headers support additional 4 USB Ports
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 1x CD in header
º CPUFAN/PWRFAN/SYSFAN connectors
|
| SYSTEM BIOS | º AMI BIOS with 4Mb Flash ROM
º Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
º Supports ACPI revision 1.0 specification
|
| FORM FACTOR | º Micro-ATX Size, 244mm*244mm
|
