ECS RC410-M2 Rev.2.1 Socket LGA775 DDR2-667 SATA Ultra DMA 133 PCI-Express X16, x1 & PCI Slots 8-channel audio VIA 6307 Motherboard For Intel Pentium D Dual Core / Pentium 4 & Celeron Processors.
* Please Note: This is an OEM motherboard and it does not come with rear I/O shield also known as back-plate cover. This part is not needed and you can still install the board in standard ATX case.
![](https://www.ascendtech.us/mmASC/Images/RC410M2V21NOFW-001.jpg)
Operating System Compatibility | º Windows XP & Vista Only! Requires Floppy Drive For XP Installation. |
CPU | º LGA775 socket for latest Intel Pentium 4 / Celeron processor º FSB 800/533 MHz º Support Hyper-Threading Technology |
CHIPSET | º ATI® RC410 & Uli M1573 º North Bridge: ATI® RC410 º South Bridge: Uli M1573 |
GRAPHICS | º RC410 on-chip (Radeon X300-based 2D/3D graphics) |
MEMORY | º Single-channel DDR2 memory architecture º 2 x 240-pin DDR2 DIMM socket support up to 2 GB º Support DDR2 667/533/400 DDR2 SDRAM |
EXPANSION SLOT | º 1 x PCI Express x16 slot º 1 x PCI Express x1 slot º 2 x PCI slots |
STORAGE | º Supported by M1573 • 2 x Ultra DMA133/100/66 devices • 4 x Serial ATA devices • RAID0, RAID1& RAID 0+1 configuration |
AUDIO | º Realtek ALC880 8-channel audio CODEC |
LAN | º Marvell 8001 10/100/1000 Mbps Fast Ethernet Controller |
REAR PANEL I/O | º 1 x PS/2 keyboard & PS/2 mouse connectors º 4 x USB ports º 1 x RJ45 LAN connector º 1 x VGA port º 1 x 1394a port(optional) º 1 x Parallel port (LPT1) º 1 x Serial port (COM1) º 1 x Audio port (Line-in,4x Line-out, Mic_in) |
INTERNAL I/O CONNECTORS & HEADERS | º 1 x 24-pin ATX Power Supply connector º 1 x 4-pin ATX 12V connector º 1 x FDD connector supports one 360K~2.88MB FDD º 2 x IDE connectors º 4 x Serial ATA connectors º 1 x COM2 header (optional) º 1 x SPDIF out header º 1 x 1394a header(optional) º 2 x USB 2.0 headers support additional 4 USB Ports º 1 x Front panel switch/LED header º 1 x Front panel audio header º 1x CD in header º CPUFAN/PWRFAN/SYSFAN connectors |
SYSTEM BIOS | º AMI BIOS with 4Mb Flash ROM º Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI º Supports ACPI revision 1.0 specification |
FORM FACTOR | º Micro-ATX Size, 244mm*244mm |
![](https://www.ascendtech.us/mmASC/Images/RC410M2V21NOFW-03.jpg)
![](https://www.ascendtech.us/mmASC/Images/RC410M2V21NOFW-04.jpg)