Emachines Seabreeze T1 Motherboard 103292. Featuring Intel i845 Chipset P4 400FSB / 533MHz FSB Support with Video Sound Lan onboard and 4 USB 2.0 ports. Desktop board supports a single Pentium 4 or Celeron processor with a system bus frequency of 400Mhz or 533 MHz.
Compatible with: T2742 T2796 T2798 T2824 T2885
Features:
- Intel 845GL chipset
- Intel Extreme Graphics2 controller
- Support for Intel Pentium 4 Northwood 478-pin, 400/533-megahertz (MHz) Front Side Bus (FSB) processors
- Support for Intel Celeron 478-pin, 400-MHz FSB processors
- Support for up to 2 gigabytes (GB) of 333/266-MHz DDR SDRAM
- 10/100 Ethernet LAN capability
Specifications:
| Form Factor | microATX - 9.60 × 8.20 inches |
| Processor | Support for an Intel Pentium 4 processor in an mPGA478 socket with a 400 or 533MHz system bus Support for an Intel Celeron processor in an mPGA478 socket with a 400MHz system bus |
| Memory | Two 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets Support for single-sided or double-sided DIMMs (DDR333/266) Support for up to 2 Gigabytes (GB) system memory
Note: This motherboard is designed to support DIMMs based on 512-Mbit technology for a maximum capacity of 2 GB, but this technology has not been validated (current validation up to 1.0 GB) on this board. |
| Chipset | Intel 845GL Chipset consisting of: - Intel 82845GL Graphics and Memory Controller Hub (GMCH)
- Intel 82801DB I/O Controller Hub (ICH4)
- 4-Mbit Firmware Hub (FWH)
|
| Video | Intel Extreme Graphics controller |
| Audio | Audio subsystem for AC'97 processing using the Analog Devices AD1981B codec |
| I/O Control | SMSC LPC47M172 LPC Bus I/O controller |
| USB | Support USB 2.0 devices |
| Peripheral Interfaces | Up to six USB ports One serial port One parallel port Two IDE interfaces with UDMA 33, ATA-66/100 support Support for one floppy disk drive PS/2 keyboard and mouse ports Three fan connectors |
| BIOS | Intel/AMI BIOS (resident in the 4-Mbit FWH) - Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS
|
| Instantly Available PC Technology | Support for PCI Local Bus Specifications Revisions 2.2 Suspend to RAM support Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports |
| Expansion Capabilities | Three PCI bus add-in card connections (SMBus routed to PCI bus connector 2) |
| A | Back panel ports | O | BIOS configuration jumper |
| B | Chassis fan connector | P | Front panel USB connector |
| C | CPU socket | Q | Front panel header |
| D | Standby power indicator LED | R | Intel 82802AB firmware hub |
| E | CPU fan header | S | Intel 82801DB I/O ICH4 |
| F | DIMM sockets | T | Diagnostic LED |
| G | SMSC I/O controller | U | PCI slots |
| H | ATX power connector | V | ADI SoundMax chipset |
| I | Floppy disk drive connector | W | Front panel audio connector/jumper block |
| J | Secondary IDE connector | X | Intel 82562ET LAN controller |
| K | Primary IDE connector | Y | ATX auxiliary power connector |
| L | Speaker | Z | ATAPI CD/DVD-ROM audio in |
| M | Battery | Z1 | Intel 82845GL GMCH |
| N | Intrusion header |