Genuine Original Extron MVX VGA Video Stereo Matrix Switcher MVX88VGAA 33-1025-01 REV C. The MVX 88 VGA A is designed to route high resolution computer-video and stereo audio signals. Convenient 15-pin HD connectors are used for all computer-video input and output connections. Unbalanced stereo audio is input on 3.5 mm stereo mini jacks, while balanced or unbalanced stereo audio is output on captive screw connectors. Using pre-terminated cable assemblies, such as Extron's VGA with Audio Cables, eliminates crimping and makes installations faster and easier. In addition, the MVX 88 VGA A comes standard with the QS-FPC- QuickSwitch Front Panel Controller, which allows for touch-of-a-button input and output selection directly from the front panel. It can also be controlled through RS-232 serial control utilizing Extron's SIS- Simple Instruction Set commands, the optional Extron IR 501 remote control, the optional Extron MKP 2000 or MKP 3000 X-Y remote control panels, or via a third party control system.
Model Number: MVX88VGAA
Part Number: 33-1025-01 REV C
Specifications:
| Routing | 8 x 8 matrix |
| Gain | Unity |
| Bandwidth | 350 MHz (-3 dB), fully loaded |
| Crosstalk | <-60 dB nominal @ 10 MHz, <-39 dB @ 100 MHz |
| Switching speed | 20 ms (max) |
| Number/signal type | VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video (bi-level and tri-level sync), S-video, composite video |
| 84/88 models | 8 |
| Connectors | 8 female 15-pin HD |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.3 V to 2.0 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 145 kHz |
| Vertical frequency | 30 Hz to 170 Hz |
| Return loss | <-40 dB @ 5 MHz |
| Minimum/maximum levels | 0.3 V to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Standards | Computer scan rates and also NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Output level | AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
| Max. propagation delay | Horizontal: 90 ns nominal
Vertical: 160 ns nominal |
| Power | 100 VAC to 240 VAC, 50-60 Hz, internal |
