Hauppauge WinTV-HVR-150 26552 LF HP 5188-4202 NTSC NTSC-J TV tuner card. The WinTV-PVR-150 uses a hardware MPEG-2 encoder, so you don't slow down your PC while recording. With MPEG data rates from 2 to 8Mbits/sec, you decide how much hard disk space your videos will consume (the lower the data rates, the less disk space your videos will consume, but with lower video quality).
Manufacturer: Hauppauge
HP Part Numbers: 5188-4202 5187-7619
Compatible Part Number: 26552 LF 01042 FMC-901 PVR-150 6002635 6562290
Compatible models: HP M7277C (ED845AAR) Series Desktop Systems
Features:
Plug and play TV tuner suppport for Windows XP Media Center Edition.
Live TV from the built-in 125 channel cable ready TV tuner, plus composite/S-Video and audio inputs to connect to a cable TV set top box or satellite receivers.
Built-in hardware MPEG-2 encoder. Record TV or videos to disk using from 1-2 Gigabytes of disk space per hour of recorded video. While recording, the WinTV-PVRs' hardware MPEG encoder does all the work, so your PC continues to run at full speed. Over USB 2.0, the WInTV-PVR-USB2 can record at up to 8MBits/sec.
Pause live TV with instant replay, fast forward and rewind.
FM radio receiver, so you can listen to FM radio while you work on your PC
dbx-TV stereo decoder, for great TV sound.
Plug-and-play TV tuner suppport for Windows XP Media Center Edition.
Just plug the WinTV-PVR-150 MCE into an open PCI slot in your PC, install the Media Center driver, and you can watch TV with Media Center's MyTV button!
WinTV-PVR-150 MCE allows you to upgrade your Media Center PC or laptop by adding a TV tuner and FM radio. Record your favorite TV shows to your hard disk, or pause live TV and create your own instant replay!
Use up to two WinTV-PVR-150 MCE's in a Media Center 2005 system:
Watch one TV channel while recording another by installing two WinTV-PVR-150's in a Media Center system. If you already have a Media Center system with a Hauppauge WinTV-PVR, you can add a second WinTV-PVR-150 (any model).
Feature | Specification |
---|
MPEG-1/2 Hardware Encoder | Based on the Conexant CN23416 chip |
TV Tuner Options | Supports NTSC, or PAL and SECAM video standards |
FM Radio Option | Yes |
Audio/Video Inputs | S-Video using 4-pin DIN Composite video input via RCA connector Left and Right audio using RCA connectors |
Front Panel Audio/Video Connector | Supports the following front ports: S-Video Composite video Left and right audio Optional IR based remote control |
Live Video Display | Supported via the Conexant CN2388x Broadcast Decoder |
Stereo Audio Decoder | dbx-TV standard (NTSC) and NICAM (PAL and SECAM) |
Power Requirements | 3.3V ± 5% 12 VDC ± 10% @ 400 mA |
Operating Temperature | 0° C to 35° C ambient |
Operating Humidity | 0% to 85% non-condensing |