Intel 915GV Chipset. Supports LGA775 775-pin processors with Hyper-Threading Technology 533 / 800 FSB, two 240-pin DDR2 DIMM connectors for DDR2 400, DDR2 533, non-ECC DIMMs. Please note this motherboard features Gateway Logo when booted, this board can be used in STANDARD BTX cases. This board is not designed for ATX cases, this is the new style BTX.
Features:
- Intel 915GV chipset
- Supports Intel Pentium® 4 and Celeron® D processors
- LGA775 socket
- 800, or 533 MHz system bus
- Memory support for DDR2 533/400 MHz DIMMs
- Integrated Intel Graphics Media Accelerator
- Integrated Intel High Definition Audio
- Integrated Intel 10/100 LAN
Packaging: OEM System Builder Bulk Packed. IO shield not included.
Specifications:
| Form Factor | BTX Form Factor (10.5 × 10.4 inches) |
| Processor | Support for Intel® Pentium® 4 or Celeron® D processors in an LGA775 socket with an 800 or 533 MHz system bus |
| Memory | - Two 240-pin DDR2 DIMM slots
- Support for DDR2 533 and DDR2 400 ECC and Non-ECC DIMMS
- Maximum of four double-sided DIMMs (8 rows populated) with unbuffered DDR533/DDR400
- Support 256 Mb, 512 Mb and 1024 Mb technologies for x8 and x16 devices
- Maximum capacity: 2048 MB
|
| Chipset | Intel 915GV Chipset- Intel 915GV Graphics/Memory Controller Hub (GMCH)
- Intel I/O controller hub (ICH6)
- 4 Mbit Firmware Hub (FWH)
|
| Video | Integrated Intel Graphics |
| Audio | Integrated Intel High Definition Audio subsystem using the Realtek ALC860VU audio codec |
| I/O Control | LPC Bus I/O controller |
| USB | Support for USB 2.0 devices |
| Peripheral Interfaces | - Six USB ports (four on back panel, two internal)
- One serial port
- One parallel port
- 2 Serial ATA interfaces
- One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
- One floppy disk drive interface
- One PS/2 keyboard port
- One PS/2 mouse port
- Two front IEEE-1394a connectors
- RJ-45 LAN port
- Three rear port audio jacks
|
| LAN Support | 10/100 Mbits/sec LAN subsystem using Marvell® PCIe |
| Expansion Capabilities | Two PCI Conventional add-in card connectors One PCI Express ×1 bus add-in card connector |
| Heceta 6E Hardware Monitor Subsystem | - Internal Ambient Temperature Sensing
- Monitor power supplies (+5 V, +3.3 V, +1.5 V, +Vccp, +3.3 VSB)
- SMBus interface used to access the ASIC
- WATCHDOG™ Comparisons of all monitored values
- Remote Thermal Diode Sensing for direct processor temperature monitoring
- Discrete remote thermal diode sensor located near the 2 × 12 power connector
|