Intel Socket T LGA775 Intel 915G Chipset
OEM Motherboard. This motherboard supports Intel Pentium 4 LGA775 processors, Intel Graphics Media Accelerator 900 DDR 400/333 MHz memory, and Intel High Definition Audio.
* Please Note: This is an OEM motherboard and it does not come with rear I/O shield also known as back-plate cover; this part is not needed and you can still install the board in standard ATX case.
Specifications:
| Intel Model Number | D915GAG/D915PSY |
| Processor | Support for an Intel Pentium 4 processor in an LGA775 socket with an 800 or 533 MHz system bus |
| Memory | Two DDR SDRAM Memory Module (DIMM) sockets Support for DDR 400 MHz and DDR 333 MHz DIMMs Support for up to 4 GB of system memory |
| Chipset | Intel 915G Chipset, consisting of:Intel 82915G Graphics Memory Controller Hub (GMCH) Intel 82801FB I/O Controller Hub (ICH6) 4-Mbit Firmware Hub (FWH) |
| Video | Intel GMA900 onboard graphics subsystem |
| Audio | Intel High Definition Audio subsystem using the Realtek ALC860 audio codec |
| I/O Control | Support for USB 2.0 devices |
| Peripheral Interfaces | Four back USB ports One serial port One Firewire portOne parallel port Four Serial ATA interfaces One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support One diskette drive interface PS/2 keyboard and mouse ports |
| LAN Support | 10/100 Mbits/sec LAN subsystem using the Intel® 82562EZ Platform LAN Connect (PLC) device |
| BIOS | Intel/AMI BIOS (resident in the 4 Mbit FWH) Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS |
| Hardware Monitor Subsystem | Hardware monitoring and fan control ASIC Voltage sense to detect out of range power supply voltages Thermal sense to detect out of range thermal values Three fan connectors Three fan sense inputs used to monitor fan activity Fan speed control |
| Form Factor | microATX Form Factor (9.60 × 9.60 inches [243.84 × 243.84 millimeters] |
