Emulex LPe111 4-GB PCIe x4 Fibre Channel HBA Card 6008032R. Excellent value for small and medium-sized businesses. Exceptional performance and full-duplex data throughput.
Features:
- Excellent value for small and medium-sized businesses
- First-time users can install an HBA in matter of minutes without any SAN expertise
- SAN performance and scalability without complexity
- Robust interoperability ensured by testing with best-in-class switches and arrays from select storage partners
- Exceptional performance and full-duplex data throughput
- Comprehensive virtualization capabilities with support for N-Port ID Virtualization (NPIV) and Virtual Fabric
- Simplified installation and configuration using common HBA drivers and AutoPilot Installer®
- Efficient administration via HBAnyware® for HBAs anywhere in the SAN
- Common driver model eases management and enables upgrades independent of HBA firmware
Specifications:
Standards | · ANSI Fibre Channel: - FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4,
- FC-FLA, FC-PLDA, FC-TAPE, FCP-2
- Fibre Channel class 2 and 3
- PHP hot plug-hot swap
· PCI Express base spec 1.0a · PCI Express card electromechanical spec 1.0a |
Architecture | · Single-channel · Up to 16 total port logins available · 4 Gb/s, 2 Gb/s or 1 Gb/s fibre channel link speeds automatically detected |
Hardware Environments | x86 and x64 processor families |
Optical Characteristics | · Data rates: 1.0625, 2.125 and 4.25 Gb/s auto-detected · Optics: Short wave lasers with LC type connector · Cable: - 50/125 µm, up to 300 meters at 2 Gb/s; 150 meters at 4 Gb/s
- 62.5/125 µm, up to 150 meters at 2 Gb/s; 70 meters at 4 Gb/s
|
Voltage Requirement | +3.3 volts |
Temperature | · Operating: 32° to 131° F (0° to 55° C) · Storage: -40° to 158° F (-40° to 70° C) |
Airflow Required | Natural convection |
Relative Humidity | 5% to 95% non-condensing |