Adaptec SCSI Raid Array 1000 Controller Card Adapter Model AAA-131B. The AAA-131 single-channel, half-size array adapter is a high-performance choice for systems that already have embedded SCSI or an installed add-in host adapter for low speed devices.
Specifications:
| Number of devices: |
| | Up to 15 devices per channel |
| Bus System Interface Type: |
| | 32-bit PCI Local Bus |
| External Connectors: |
| | 68-pin (internal-to-external converter available) |
| Internal Connectors: |
| | 50 and 68-pin |
| Data Transfer Rate: |
| | Up to 133 MByte/sec (40 MByte/sec per channel) |
| System Requirements: |
| | PCI-based 90-MHz Pentium or equivalent motherboard with PCI-to-PCI bridge support32 MByte system memory (NetWare)48 MByte system memory (Windows NT) |
| Package Contents: |
| | AAA-131 PCI Array Adapter OEM |
| Warranty: |
| | 30 day warranty |
| |
Device Protocol: SCSI Ultra, Fast, and Wide (8-and 16-bit) 20 MHz Advanced SCSI Features: SCSI PhaseEngine® coprocessor
Auto-termination
255 simultaneous commands
Scatter/gather
Tagged command queuing
Disconnect/reconnect
UltraSCSI 20 MHz for data transfer up to 40 MByte/sec per channel
Electrical Drivers: Single-ended and active SCSI Channels: 1, 2, or 3 fully independent PCI
UltraSCSI channels bridged to system PCI bus Array Support: Drives can be supported in array or non-array configurations
Up to 4 arrays configurable per AAA-13x
Up to 16 drives per array RAID levels: 0, 1 (mirroring), 0/1, or 5 Board Dimensions: 6.93 inches (17.602 cm) by 4.2 inches (10.668 cm) Power Consumption: 5V +/- 5% Operating Characteristics: 41 F to 131 F (5 C to 55 C)
20% to 90%, non condensing Storage Characteristics: -76 F to 302 F(-60 C to 150 C)
20% to 90%, non condensing |