FSP550-60PLG 9PA5500104 FSP550PLGR-SLI | Spi FSP550-60PLG 550W Psu FSP550PLGR-SLI

Sparkle Power FSP550-60PLG 550W EPS12V 100-240V 10A 60-50Hz Switching Power Supply FSP550PLGR-SLI 9PA5500104.

Sparkle Power Part Number: 9PA5500104
SPI Part Number: FSP550PLGR-SLI
Model Number: FSP550-60PLG

Features:

- Complied with EPS12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down

Specifications:

- Type: EPS12V
- Total Power: 550W
- Temperature Range: Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +80° C
- Humidity: 95% on operating and 95% on storage
- Dielectric Withstand: Input to frame ground 1800V AC for 1 second
- Efficiency: 63% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
- Rise Time: Less than 20ms
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 3.5mA at 264VAC/ 60Hz
- MTBF: 100,000 hours on maximum load at +25° C degree
- Dimension (WxHxL): 150x86x140mm/5.9"x3.4"x5.5" inches
Input:
- Input Range: 90~265V AC, Full Range Input
- Frequency: 47~63Hz
- Input Current: 10A (RMS) @115V AC, 5A (RMS) @230V AC
- Inrush Current: 80A Max for 115V AC, 120A Max for 230V AC Cold start

OUTPUT
Output Voltage	Minimum Load	Maximum Load	Load Reg.	Line Reg.	Ripple & Noise
+3.3V	0.4A	27.0A	+5% ~ -4%	± 1%	50mV P-P
+5V	3.0A	29.0A	+5% ~ -4%	± 1%	50mV P-P
+12V	1.5A	36.0A	+5% ~ -4%	± 1%	120mV P-P
-5V	0.0A	0.3A	± 10%	± 2%	120mV P-P
-12V	0.0A	0.8A	+9% ~ -4%	± 2%	120mV P-P
+5Vsb	0.0A	2.0A	+5% ~ -4%	± 1%	50mV P-P