Supermicro SuperServer 5038MR-H8TRF Intel Socket LGA2011-3 Chipset C612 2x 1620W PSU 16-HDD Tray 8-Node 3U MicroCloud Server SYS-5038MR-H8TRF.
Model Number: 5038MR-H8TRF
Supermicro Part Number: SYS-5038MR-H8TRF
Backplane Part Number: BPN-SAS-938H
Node Module Part Number: MBD-X10SRD-F X10SRD-F
PSU Part Number: PWR-1K62P-1R
Features: (Per Node)
- Single socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v4/ v3 & E5-1600 v4/ v3* family
- 2x 3.5" Hot-swap SATA3/SAS drive bays by default; or 2x 2.5" SATA3 HDD Bays w/ optional kits (SAS requires RAID/HBA AOC)
- 1x PCI-E 3.0 x8 and 1x Micro-LP
- Up to 512GB ECC 3DS LRDIMM, up to DDR4- 2400MHz; 4x DIMM slots
- 2x GbE LAN ports via Intel i350
- 1x Dedicated LAN for IPMI Remote Management
- 4x 8cm heavy duty hot-swap fans with optimal cooling zone (per system)
- 1620W Redundant power supplies Platinum Level Certified (per system)
Parts Included
- Motherboard/Chassis: 8x Supermicro X10SRD-F Motherboards / 1x 3U Chassis
- Add-on Card/Module: 8x AOC-CGP-i2
- Air Shroud: 8x MCP-310-93803-0B
- Backplane: 1x BPN-SAS-938H
- I/O Cable: 1x CBL-0218L SB/KVM/SUVI,36 PIN-to-9 PIN/15 PIN/2 USB CH,11.5CM,30/28AWG
- PWR Cable: 2x CBL-PWCD-0578
- Riser Card: 8x RSC-RR1U-E8
- Heatsink/Retention: 10x SNK-P0047PS 1U Passive CPU Heatsinks
- Power Supply: 2x PWS-1K62P 1620W Redundant Power Supply Module
- Rails: Left & Right 3U Chassis Rails
Specifications:
Motherboard
- Supermicro X10SRD-F
Processor
CPU
- Intel Xeon processor E5-2600 v4/ v3, E5-1600 v4*/ v3* family (up to 145W TDP)
- Single Socket R3 (LGA 2011)
Core / Cache: Up to 22 Cores / Up to 55MB Cache
* BIOS version 2.0 or above is required
* Ambient temperature should be no higher than 25°C
System Memory
Memory Capacity
- 4x 288-pin DDR4 DIMM slots
- Up to 512GB ECC 3DS LRDIMM
- Up to 256GB ECC LRDIMM
- Up to 128GB ECC RDIMM
Memory Type: 2400/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes
- 3DS LRDIMM: 128GB
- LRDIMM: 64GB, 32GB
- RDIMM: 32GB, 16GB, 8GB, 4GB
Memory Voltage: 1.2 V
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board Devices (per node)
Chipset: Intel C612 chipset
SATA
- 1x SATA DOM
- SATA 3.0 (6Gbps) with RAID 0, 1
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Aspeed AST2400 BMC
Headers: 1x USB Type A 3.0, TPM ready
Graphics: Aspeed AST2400 BMC
Network Devices (per node)
MicroLP NIC
Intel i350, 2x Gigabit LAN ports
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
MicroLP Adapter Matrix (Networking options)
Input / Output (per node)
Serial ATA: 2x SATA 3.0 ports (6Gbps)
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
KVM: 1x VGA, 1x COM, and 2x USB 2.0 (with KVM dongle) ports
System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
Rear Window (each node)
Switch: Power / UID
Chassis
Form Factor: 3U
Model: CSE-938BH-R1620B
Front Panel
Buttons: Power On/Off button
LEDs
- Power LED
- Node status LED
Expansion Slots (per node)
PCI-Express
- 1 (x8) PCI-E 3.0 Low-profile slot
- 1x Micro-LP for Dual GbE (pre-installed), 10GbE or IB AOC option; MicroLP Adapter Matrix (Networking options)
Drive Bays (per node)
Hot-swap
- 2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total
- Enterprise SATA HDD only recommended
System Cooling
Fans: 4x 8cm 11K RPM, 4-pin PWM cooling fans
Power Supply
2x 1620W high-efficiency redundant power supply w/ PMBus
AC Input
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
Certification: Platinum Level Certified94%+ Platinum Certified
PC Health Monitoring
CPU
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN: Cooling zone
Temperature: Monitoring for CPU and chassis environment
Operating Environment / Compliance
RoHS: RoHS Compliant
Environmental Spec.
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)