Product SKUs |
SYS-7045W-NTR+B | - SuperServer 7045W-NTR+B (Black)
|
Motherboard |
Super X7DWN+ |
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel 64-bit Xeon processor(s) of the same type below:
- Quad-Core Intel
Xeon Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.00 GHz - Dual-Core Intel
Xeon Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.16 GHz
|
System Bus | - 1600 / 1333 / 1066 MHz system bus
|
System Memory |
Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 128 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
Memory Type | - 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes | - 512 MB, 1GB, 2GB, 4GB , 8GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
On-Board Devices |
Chipset | - Intel® 5400 (Seaburg) chipset
- ESB2
|
SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Wondows only)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
Network Controllers | - Intel® 82575 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
Graphics | - ATI ES1000 controller with 32 MB of video memory
|
Super I/O | |
Expansion Slots |
PCI-Express | - 3 (x8) PCI-e slots (2 w/ Gen 2.0)
- 1 (x4) PCI-e slot
|
PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
|
UIO | |
Input / Output |
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | - 1 Floppy controller; 1.44 MB
|
LAN | |
USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
VGA | |
Keyboard / Mouse | - PS/2 keyboard and mouse ports
|
Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Serial header
|
System BIOS |
BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
- EFI BIOS Support
|
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
Chassis |
Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
Model | |
Dimensions |
Height | |
Width | |
Depth | |
Gross Weight | |
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
|
Ports | |
Drive Bays |
Hot-swap | - 8x Hot-swap Drive Bays
- Supports up to 6x SATA Hard Drives
|
Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
Peripheral Drives |
Floppy | - Panasonic 3.5" 1.44MB Floppy Drive
|
SAS / SATA Backplane |
SAS / SATA Backplane w/ Enclosure Management |
System Cooling |
Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
Shroud | |
Power Supply |
(1 + 1) Redundant 800W AC power supply w/ PFC |
AC Voltage | - 100 - 240V, 50-60Hz, 10-4 Amp
|
+5V standby | |
+12V | |
+5V | |
+3.3V | |
-12V | |
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN | - Total of eight fan headers supporting up to 8 fans
- Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|