X7DWN+ LGA 771 DUAL XEON | Supermicro 745TQ-R800 Xeon Server Tower

SuperMicro SuperChassis 745TQ-R800 4U Server Tower with Super Micro X7DWN+ LGA771 Motherboard, Dual Intel Xeon Processor E5462 2.80 GHz Processors, 8GB DDR2 667Mhz PC2 5300 240-Pin ECC Memory. Supermicro's SC745 Chassis series is optimized for the latest dual-core Xeon 5000 / 5100 sequence processor system. Designed with 100% cooling redundancy, high-efficiency power supply, hot-plug fans and hot-swappable drive bays, this chassis offers reliable performance with problem-free maintenance.

* Please Note, this unit is used and may have minor scuffs, scratches or dents, but are fully operational and function as intended!

KEY FEATURES:

1. 800W Redundant High-efficiency Power Supplies
2. 8 x 3.5" SAS/SATA Hot-swappable Drive Bays
3. GPU Support
4. Adjustable Air Shroud for Any Configurations
5. 100% Cooling Redundancy
6. Rack mount / Tower Convertible
7. 2x Front USB Ports
8. Locking Bezel with Filter
9. Tool-less operation
10. Full SES2 support is available with SAS motherboards and other compatible components.

SPECIFICATIONS:

Model	SuperChassis 745TQ-R800
Motherboard	SuperMicro X7DWN+
Processor	• Intel Xeon Processor E5462 (12M Cache, 2.80 GHz, 1600 MHz FSB)
Supported Processors	Dual 771-pin LGA Sockets Supports up to Dual Intel 64-bit Xeon processor(s) of the same type below: • Quad-Core Intel Xeon Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.00 GHz • Dual-Core Intel Xeon Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.16 GHz
System Bus	• 1600 / 1333 / 1066 MHz system bus
System Memory	• 8GB 240-Pin DDR2 667Mhz PC2 5300 ECC Memory
Memory Capacity	• Sixteen 240-pin DIMM sockets • Supports up to 128 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory • Dual branch memory bus • Memory must be populated in pairs • Memory Sparing supported
Memory Type Supported	• 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	• 512 MB, 1GB, 2GB, 4GB , 8GB
Memory Voltage	• 1.8 V or 1.5 V
Error Detection	• Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Chipset	• Intel 5400 (Seaburg) chipset • ESB2
SATA	• Intel ESB2 SATA 3.0Gbps Controller • RAID 0, 1, 5, 10 support (Wondows only)
IPMI	• Support for Intelligent Platform Management Interface v.2.0 / 1.5 • 200-pin IPMI slot (SIMSO(+)) • For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
Network Controllers	• Intel® 82575 Dual-Port Gigabit Ethernet Controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Intel I/OAT support for fast, scalable, and reliable networking
Graphics	• ATI ES1000 controller with 32 MB of video memory
Super I/O	• Winbond 83627HG chip
Expansion Slots PCI-Express	• 3 (x8) PCI-e slots (2 w/ Gen 2.0) • 1 (x4) PCI-e slot
PCI-X	• 2x 64-bit 133MHz PCI-X (3.3V) slots
UIO	• 1x UIO slot
Serial ATA	• Six Serial ATA ports • Six SATA hard drives supported
IDE	• Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card • Compact Flash (40-pin connector, IDE 1, single channel) slot • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
LAN	• 2x RJ45 LAN ports
USB	• 2x USB rear ports • 3x USB internal headers • Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA	• 1x VGA Port
Keyboard / Mouse	• PS/2 keyboard and mouse ports
Serial Port / Header	• 1 Fast UART 16550 serial port • 1 Serial header
BIOS Type	• 8Mb Flash EEPROM with Phoenix® BIOS • EFI BIOS Support
BIOS Features	• Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3
Chassis Form Factor	• 4U Rackmountable / Tower
Height	• 7.0" (178mm)
Width	• 17.2" (437mm)
Depth	• 25.5" (648mm)
Color	• Beige
Front Panel Buttons	• Power On/Off button • System Reset button
Front Panel LEDs	• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LEDD • Power Fail LED
Ports	• 2x USB Ports
Hot-swap Drive Bays	• 8x 3.5" Hot-swap SAS/SATA Drive Bays • SAS or enterprise SATA HDD only recommended • 8x 2.5" Hot-swap SAS/SATA Drive Bays
SAS / SATA Backplane	• SAS / SATA Hard Drive Backplane with SES2
Peripheral Bay(s)	• 3x 5.25" Peripheral Drive Bay
System Cooling Fans	• 3x 5000 RPM Hot-Swappable Cooling Fans • 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
Shroud	• 1x Air Shroud
Power Supply	• (1 + 1) Redundant 800W AC power supply w/ PFC
AC Voltage	• 100 - 240V, 50-60Hz, 10-4 Amp
CPU Monitoring	• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Monitoring	• Total of eight fan headers supporting up to 8 fans • Four 4-pin fan headers • Four 3-pin fan headers • 8x fans with tachometer status monitoring • Status monitor for speed control • Support 3-pin fans • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring	• Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • Thermal Monitor 2 (TM2) support • PECI
LED	• CPU / System Overheat LED
Other Features	• Chassis intrusion detection • Chassis intrusion header • SDDC Support