SUPERMICRO MBD-C2SEA-O LGA 775 Intel G45 HDMI ATX Motherboard. Supermicro continues their long tradition of solid motherboards with great feature sets. This Intel G45 based board supports Pentium Dual-Core processors through the latest Core 2 Quad and Core 2 Extreme processors with FSB speeds of 800/1066/1333MHz. It also supports up to 8GB of DDR3 800/1066/1333 memory for blisteringly fast performance. It comes with a full set of ports including 6xUSB 2.0 on the back panel, 4 headers for 4 more ports plus 2 internal ports. The internal ports let you add Bluetooth or Wireless connectivity without using an expansion slot or external port. You also get 2xFireWire headers, 2xPS/2 ports, a Gigabit Ethernet port and a full slate of audio ports including SPDIF out. Video is handled by an Intel GMA X4500 HD that supports HD video resolutions and has full DX10 support. The motherboard has both VGA/D-Sub and HDMI connectors so it does not matter what kind of connector your monitor has.
SPECIFICATIONS:Brand: SUPERMICRO
Model: MBD-C2SEA-O
CPU: Single LGA775 Socket
- Supports Intel® Core™2 Extreme QX9000/QX6000 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
System Bus: 1333 / 1066 / 800 MHz system bus
Memory Capacity: Four 240-pin DIMM sockets, supports up to 8 GB
Memory Type: DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes: 256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage: 1.5 V only
Chipset: Intel G45 Express / ICH10 Chipset
Serial ATA: Intel ICH10 SATA2 (3 Gbps) controller built-in
Network Controllers: 1 x Realtek RTL8111C Gigabit Ethernet, Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
Audio: Realtek ALC888 HD 7.1 Channel Audio
Video: Intel GMA X4500 HD
Super I/O: Winbond 83627DHG-P chip
Clock Generator: CV183-2
Input / Output Ports:
Serial ATA:Six Serial ATA ports (3Gbps), 6 x SATA hard drives supported
IDE: One EIDE channel supports up to two UDMA IDE devices, ITE8213F chipset
Floppy: 1 Floppy controller; 1.44 MB
LAN: 1x RJ45 LAN port
USB:12 x USB 2.0 / 1.1 compatible (6 rear + 2 on-board + 4 headers)
Audio: S/PDIF out, Line-in, Line-out, Microphone Ports
VGA: On board VGA + HDMI port
Keyboard / Mouse: PS/2 keyboard and mouse ports
Serial Ports: 1 x Serial Header
IEEE 1394a 2 x headers
Expansion Slots:
- 1 x (x16) PCI-E 2.0 slot
- 1 x (x4) PCI-E (using x16 slot)
- 1 x (x1) PCI-E slot
- 2 x 32-bit 33MHz PCI (5V) slots
BIOS: 16Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
PC Health Monitoring:
CPU:
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
FAN:
- Total of five 4-pin fan headers
- 3 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
Temperature:
-Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
LED:
- CPU / System Overheat LED
- Standby power alert LED
Other Features:
- Chassis intrusion Detection
- Chassis intrusion Header
Form Factor: ATX
Dimensions: 12.0" x 9.6 ", (30.5cm x 24.4cm)
